Industry news

Working principle and product use of Y-type filter

Y-type filter is an indispensable device for water, oil, gas pipelines and various equipment. It mainly removes the medium in the pipe to protect the pressure reducing valve, pressure relief valve, water level valve and water pump and other equipment. achieve normal operation. When installing, please install it at the inlet. Generally, the water filter adopts 10-30 mesh/cm2, the air filter adopts 40-100 mesh/cm2, and the oil filter adopts 60-200 mesh/cm2.

How the Y filter works

The Y-type filter is installed at the front end of each matching valve in the water inlet pipeline. When the medium in the pipeline first enters the filter, the medium enters the connected valve through the filter screen, and the impurities remain in the filter barrel, so that various types of The valve will not fail due to mechanical debris stuck in the seal.

Use of Y-type filter

The Y-type filter is a necessary filter equipment for the use of hydraulic control valves and precise mechanical products that are easy to block. It is an indispensable device for the pipeline series for conveying the medium. It is usually installed at the inlet end of the hydraulic control valve, pressure reducing valve, pressure relief valve, fixed water level valve and other equipment to eliminate impurities in the medium and prevent particulate impurities from entering. Channels, creating wall plugs to protect fittings on equipment pipes from wear and blockage.

Y-type filter product features

The Y-type filter adopts a stainless steel double-layer mesh structure, which is durable and has the characteristics of advanced structure, small flow resistance, and convenient sewage discharge. It can be used for various media such as water, steam, oil, nitric acid, urea, and oxidizing media. The mesh number of the filter should be set according to the user's needs. Generally, the water network is 18-30 mesh, the ventilation network is 40-100 mesh, and the oil-passing network is 100-480 mesh. The Y-type filter can also be combined with the expansion joint to form a Y-type pull rod telescopic filter with adjustable installation length. Filters can be made according to user requirements.

PREVIOUS:Structural features of wafer check valve

NEXT:How to choose material for knife gate valve

Leave a Reply





Leave a message